Kemmerer Bottle 2.2L TT Silicone, no carry case.
These samplers require a messenger (3-45-B10) and line (3-62-C15) for operation. SOLD SEPARATELY (also available in kits).
- Kit part
numbers are identical to bottle part numbers, but end in 2 instead of 5.
• All plastic construction
• Clear acrylic main tube
• PVC center shaft
• Suitable for trace metal and organic analysis
• Silicone seals
• Large range of sizes - 1.2 to 8.2 Liter
These Kemmerer water samplers have no metal parts to contact your sample. Delrin fasteners and an O ring replace the stainless steel garter spring in the All-Angle™ trip head. The bottle body can be either transparent acrylic, which allows you to view your sample before removal, or opaque PVC for greater durability. The all-plastic center shaft is made of plastic CPVC with a plastic delrin nut on its bottom.
• Clear acrylic main tube
• PVC center shaft
• Suitable for trace metal and organic analysis
• Silicone seals
• Large range of sizes - 1.2 to 8.2 Liter
These Kemmerer water samplers have no metal parts to contact your sample. Delrin fasteners and an O ring replace the stainless steel garter spring in the All-Angle™ trip head. The bottle body can be either transparent acrylic, which allows you to view your sample before removal, or opaque PVC for greater durability. The all-plastic center shaft is made of plastic CPVC with a plastic delrin nut on its bottom.
Designed for trace metal sampling due to silicone seals. Also may be
used for organic sampling to concentrations of mg/L. When running
metal, organic, or any other chemical analyses, it is best to run a
blank on the sampler prior to use.
The end seals mount like a tire on a hub and are easy to replace. The end seals should not be sealed, seated, or fully closed during storage. Although made of tough elastomers, they have a tendency to take a set during long periods of inactivity and stress. For this reason, store your Kemmerer with the seals slightly open and not touching the bottle body.
The end seals mount like a tire on a hub and are easy to replace. The end seals should not be sealed, seated, or fully closed during storage. Although made of tough elastomers, they have a tendency to take a set during long periods of inactivity and stress. For this reason, store your Kemmerer with the seals slightly open and not touching the bottle body.
A thermometer can be mounted inside acrylic Kemmerer bottles, please call for information.
NOTE: Volume may vary slightly. It is recommended that you verify the exact volume of your bottle prior to use.
More info
These samplers require a messenger (3-45-B10) and line (3-62-C15) for operation. SOLD SEPARATELY (also available in kits).
- Kit part
numbers are identical to bottle part numbers, but end in 2 instead of 5.
• All plastic construction
• Clear acrylic main tube
• PVC center shaft
• Suitable for trace metal and organic analysis
• Silicone seals
• Large range of sizes - 1.2 to 8.2 Liter
These Kemmerer water samplers have no metal parts to contact your sample. Delrin fasteners and an O ring replace the stainless steel garter spring in the All-Angle™ trip head. The bottle body can be either transparent acrylic, which allows you to view your sample before removal, or opaque PVC for greater durability. The all-plastic center shaft is made of plastic CPVC with a plastic delrin nut on its bottom.
• Clear acrylic main tube
• PVC center shaft
• Suitable for trace metal and organic analysis
• Silicone seals
• Large range of sizes - 1.2 to 8.2 Liter
These Kemmerer water samplers have no metal parts to contact your sample. Delrin fasteners and an O ring replace the stainless steel garter spring in the All-Angle™ trip head. The bottle body can be either transparent acrylic, which allows you to view your sample before removal, or opaque PVC for greater durability. The all-plastic center shaft is made of plastic CPVC with a plastic delrin nut on its bottom.
Designed for trace metal sampling due to silicone seals. Also may be
used for organic sampling to concentrations of mg/L. When running
metal, organic, or any other chemical analyses, it is best to run a
blank on the sampler prior to use.
The end seals mount like a tire on a hub and are easy to replace. The end seals should not be sealed, seated, or fully closed during storage. Although made of tough elastomers, they have a tendency to take a set during long periods of inactivity and stress. For this reason, store your Kemmerer with the seals slightly open and not touching the bottle body.
The end seals mount like a tire on a hub and are easy to replace. The end seals should not be sealed, seated, or fully closed during storage. Although made of tough elastomers, they have a tendency to take a set during long periods of inactivity and stress. For this reason, store your Kemmerer with the seals slightly open and not touching the bottle body.
A thermometer can be mounted inside acrylic Kemmerer bottles, please call for information.
NOTE: Volume may vary slightly. It is recommended that you verify the exact volume of your bottle prior to use.
Customers who bought this product also bought:
- Plank Tow...
$199.82
- Trip Head PU...
$114.35
- Messenger...
$59.43
- Tray,...
$14.96
- Cable...
$30.03
- Rite In The...
$8.66
- End Seals...
$172.10
- D-Frame Repl...
$91.25
- Polyester...
$17.33
- D-Frame Net...
$133.98
11 other products in the same category:
- Kemmerer Bottle 1.2L TT...
$605.17
- Kemmerer Bottle 1.2L TT...
$472.40
- Kemmerer Bottle 1.2L PVC...
$541.70
- Kemmerer Bottle 1.2L PVC...
$437.75
- Kemmerer Bottle 2.2L TT...
$641.55
- Kemmerer Bottle 4.2L TT...
$691.85
- Kemmerer Bottle 4.2L TT...
$587.90
- Kemmerer Bottle 6.2L TT...
$1,084.55
- Kemmerer Bottle 6.2L TT...
$842.00
- Kemmerer Bottle 8.2L TT...
$1,153.85
- Kemmerer Bottle 8.2L TT...
$911.30
No customer comments for the moment.