Categories

Van Veen Grab with Crate *Special.

Van Veen Grab with Crate *Special.

Van Veen Grab with Crate *Special.

• Large volume (24 L)
• Rubber flaps over vent screens
• Self-releasing pinch-pin™ for safety
• 0.1 m2 (360 x 280 mm) sample area
• For soft bottoms

This grab takes large samples in soft bottoms. Its long lever arms and sharp cutting edges on the bottom of the scoops allow it to cut deep into softer bottoms. The closing mechanism is our patented self- releasing pinch-pin™ attached to the two closing arms which holds the grab open before it hits the bottom. Upon impact, the tension on the chains is released, which releases the pinch-pin™. The chain pulls the closing arms together to close the scoops when the cable is lifted. The top of each scoop is covered with 583 mm stainless steel screen for water to flow through during descent. The screen is covered with a neoprene rubber flap to prevent sample washout during retrieval. Operation requires 1/8" cable (61-B) and winch, not included. Ship wt: 67 lbs.

Materials: 316 stainless steel
Fasteners: 18-8 stainless steel
Chains: stainless steel
Bottom opening: 359 x 279 mm (14-1/8" x 11")
Empty weight: 18.5 kg (41 lb)
Full weight: 68 to 90 kg (150 to 200 lb)
Volume: 24 L
Sampling area: 0.1 square meter
Includes: Shipping crate

3-1775-A10

$3,928.11

Add to cart

Shipping Rates

More info

• Large volume (24 L)
• Rubber flaps over vent screens
• Self-releasing pinch-pin™ for safety
• 0.1 m2 (360 x 280 mm) sample area
• For soft bottoms

This grab takes large samples in soft bottoms. Its long lever arms and sharp cutting edges on the bottom of the scoops allow it to cut deep into softer bottoms. The closing mechanism is our patented self- releasing pinch-pin™ attached to the two closing arms which holds the grab open before it hits the bottom. Upon impact, the tension on the chains is released, which releases the pinch-pin™. The chain pulls the closing arms together to close the scoops when the cable is lifted. The top of each scoop is covered with 583 mm stainless steel screen for water to flow through during descent. The screen is covered with a neoprene rubber flap to prevent sample washout during retrieval. Operation requires 1/8" cable (61-B) and winch, not included. Ship wt: 67 lbs.

Materials: 316 stainless steel
Fasteners: 18-8 stainless steel
Chains: stainless steel
Bottom opening: 359 x 279 mm (14-1/8" x 11")
Empty weight: 18.5 kg (41 lb)
Full weight: 68 to 90 kg (150 to 200 lb)
Volume: 24 L
Sampling area: 0.1 square meter
Includes: Shipping crate

Customers who bought this product also bought:

 

2 other products in the same category:

Comments

No customer comments for the moment.